Stihl FS 560 C-EM Product Instruction Manual - Page 19

Deflectors, Limit Stops Deflectors 8 Deflector for mowing heads only 9 Deflector for metal mowing attachments, items 4 and 5 Limit stops 10 Limit stop for circular saw blades 225 Harnesses 11 Full harness must be used WARNING Based on the cutting attachment being used: Choose the proper deflector in order to reduce the risk of injury from thrown objects and contact with the cutting attachment. Make sure your unit is equipped with the proper handle and harness in order to reduce the risk of injury from loss of control and contact with the cutting attachment. Use grass cutting metal blades, brush knifes and circular saw blades on this unit only if equipped with a bike handle. Do not use rigid polymer blades on this unit. Mounting the Bike Handle Mounting Bike Handle with Swiveling Handle Support 1 Do not rotate the control handle (1) between unpacking and mounting it on the handlebar; see also chapter on "Adjusting the Throttle Cable". The brushcutter is available with two different handlebars: 4 2 2 Handlebar for machines used primarily for mowing and brushcutting, but also for occasional sawing. 3BA004 KN 3BA003 KN English 4 3 3 Handlebar for machines used mainly for sawing, but also for mowing and brushcutting. The machine is supplied with the clamp moldings (4) mounted on the handlebars (2, 3). N Do not change the position of the clamp moldings on the handlebar until it is mounted on the handle support. The mounting procedure is the same for both types of handlebar. Therefore, the following description only shows handlebar (2). Mounting the Handlebar Assembly of the swivelling handle support involves equipping the clamp moldings with a spring and mounting them on the handle support. 2BA001 KN FS 510 C-M, FS 560 C-M 17