Stihl FS 560 C-EM Product Instruction Manual - Page 31

Opening the screw cap N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. Closing the screw cap N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 2709BA004 KN 2709BA003 KN Fitting the Full Harness Fitting the full harness is described in detail in the instruction sheet supplied. 1 2 3 N Put on the full harness (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. N Attach the spring hook to the machine's perforated strip (3). Find the right attachment point for the cutting attachment you are using - see "Balancing the Brushcutter". 002BA411 KN English Balancing the Trimmer/Brushcutter The machine will balance differently depending on the cutting attachment mounted. N Let the machine swing on the harness until it stops moving - change the connection point if necessary Hanging positions Mowing heads, grass cutting blades and brush knives should rest lightly on the ground. Circular saw blades should "hover" approx. 8 in. (20 cm) above the ground. 6BA010 KN 6BA009 KN FS 510 C-M, FS 560 C-M 29