Stihl FS 560 C-EM Product Instruction Manual - Page 3

Contents - clearing saw

Page 3 highlights

Contents English Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Approved Combinations of Cutting Attachment, Deflector, Limit Stop and Harness 16 Mounting the Bike Handle 17 Adjusting the Throttle Cable 21 Mounting the Deflector 21 Mounting the Cutting Attachment 23 Fuel 28 Fueling 28 Fitting the Full Harness 29 Balancing the Trimmer/Brushcutter 29 Starting / Stopping the Engine 30 Operating Instructions 33 Air filter 33 Engine Management 34 M-Tronic 34 Winter Operation 35 Spark Plug 36 Engine Running Behavior 38 Replacing the Starter Rope and Rewind Spring 38 Storing the Machine 42 Sharpening Metal Cutting Blades 42 Replacing Nylon Line 43 Replacing the Cutting Blade 44 Inspection and Maintenance by User 45 Inspections and Maintenance by Dealer 46 Maintenance and Care Main Parts Specifications Special Accessories Maintenance and Repairs STIHL Incorporated Federal Emission Control Warranty Statement Trademarks 48 Allow only persons who fully understand 50 this manual to operate your clearing saw. 52 53 To receive maximum performance and satisfaction from your STIHL clearing 53 saw, it is important that you read, understand and follow the safety precautions and the operating and 54 maintenance instructions in chapter 56 "Safety Precautions and Working Techniques" before using your clearing saw. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because a clearing saw is a high-speed cutting tool some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Make sure your unit is equipped with the proper deflector, handle and harness for the type of cutting attachment being used. Always wear proper eye protection. { FS 510 C-M, FS 560 C-M This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1 © ANDREAS STIHL AG & Co. KG, 2012 0458-772-8621-A. VA0.A12. 0000005279_001_GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Original Instruction Manual
Printed on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2012
0458-772-8621-A. VA0.A12.
0000005279_001_GB
FS 510 C-M, FS 560 C-M
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
this manual to operate your clearing
saw.
To receive maximum performance and
satisfaction from your STIHL clearing
saw, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your clearing
saw. For further information you can go
to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a clearing saw is a high-speed
cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
Make sure your unit is equipped with the
proper deflector, handle and harness for
the type of cutting attachment being
used. Always wear proper eye
protection.
Guide to Using this Manual
2
Safety Precautions and Working
Techniques
3
Approved Combinations of Cutting
Attachment, Deflector, Limit Stop
and Harness
16
Mounting the Bike Handle
17
Adjusting the Throttle Cable
21
Mounting the Deflector
21
Mounting the Cutting Attachment
23
Fuel
28
Fueling
28
Fitting the Full Harness
29
Balancing the Trimmer/Brushcutter
29
Starting / Stopping the Engine
30
Operating Instructions
33
Air filter
33
Engine Management
34
M-Tronic
34
Winter Operation
35
Spark Plug
36
Engine Running Behavior
38
Replacing the Starter Rope and
Rewind Spring
38
Storing the Machine
42
Sharpening Metal Cutting Blades
42
Replacing Nylon Line
43
Replacing the Cutting Blade
44
Inspection and Maintenance by
User
45
Inspections and Maintenance by
Dealer
46
Maintenance and Care
48
Main Parts
50
Specifications
52
Special Accessories
53
Maintenance and Repairs
53
STIHL Incorporated Federal
Emission Control Warranty
Statement
54
Trademarks
56