Stihl FS 560 C-EM Product Instruction Manual - Page 22
Closing the wing screw, Checking the Throttle Cable, Swiveling the Handlebar, Transport position,
View all Stihl FS 560 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English A Swiveling the Handlebar Transport position 4900BA014 KN 2 N Fold the grip of the wing screw down 28 so that it is flush. Checking the Throttle Cable N Position the handlebar (2) so that distance A is about 7 in (17 cm). Do not clamp the curved part of the handlebar. Closing the wing screw 4900BA012 KN N After mounting the control handle, check the throttle cable - see chapter on "Adjusting the Throttle Cable". 4900BA013 KN N Rotate the wing screw clockwise until it becomes difficult to turn. N Tighten down the wing screw firmly. N Loosen the wing screw (8) and unscrew it until the handlebar (2) can be turned clockwise. N Turn the handlebar 90° and then swing the handles down. N Tighten down the wing screw (8) firmly. Working position N Reverse the sequence described above to swing the handles up and turn the handlebar counterclockwise. 4900BA015 KN 20 FS 510 C-M, FS 560 C-M