Stihl FS 560 C-EM Product Instruction Manual - Page 24

English 5 N Install the grass shield before mounting the deflector - if necessary, remove the deflector that is already fitted on the gearbox. 002BA504 KN 002BA473 KN 4 N Remove dirt from joints on gearbox and defelector - make sure that no dirt gets into the screw holes in the gearbox. N Place the deflector on the gearbox (4). N Insert the screws (5) and tighten them down firmly. Fitting the grass shield 1 2 3 N Hold the gearbox so that the shaft (1) faces up. N Place the grass shield (2) on the gearbox so that the middle hole is in line with the rib (3). 5 2 4 002BA502 KN 4 N Fit the other two retainers (4) on the gearbox and tighten down the screws only moderately. N Align the grass shield so that the center of the front retainer is in line with the rib on the gearbox. N Tighten down the screws firmly. 002BA512 KN 002BA503 KN 002BA501 KN 002BA505 KN A grass shield is mounted to the gearbox when using mowing heads and grass cutting blades. It greatly reduces the amount of grass, plant residue, etc. that wraps itself around the gearbox and cutting attachment. Machines which have a mowing head or grass cutting blade as original equipment are supplied with a grass shield. A "grass shield kit" is available as a special accessory for retrofitting to machines. N Hold one of the three retainers (4) against the gearbox and grass shield so that the hole in the retainer lines up with the middle hole. N Insert the screw (5) in the retainer and tighten it down only moderately so that the grass shield (2) can still be rotated on the gearbox. 5 1 N Fit the 2.4-in (60-mm) diameter thrust plate (5) on the shaft (1). Only use the 2.4-in (60-mm) diameter thrust plate. The 2.6-in (65-mm) diameter thrust plate is too big and must 22 FS 510 C-M, FS 560 C-M