Stihl FS 560 C-EM Product Instruction Manual - Page 44
Storing the Machine, Sharpening Metal Cutting, Blades
View all Stihl FS 560 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2709BA021 KN 398BA026 KN English Installing the Rewind Starter 1 1 1 1 N Position and line up the rewind starter on the engine. N Insert the screws (1) and tighten them down firmly. Storing the Machine For periods of 3 months or longer N Drain and clean the fuel tank in a well ventilated area. N Dispose of fuel properly in accordance with local environmental requirements. N Run the engine until the carburetor is dry - this helps prevent the carburetor diaphragms sticking together. N Remove, clean and inspect the cutting attachment. N Thoroughly clean the machine. N Store the machine in a dry and secure location - out of the reach of children and other unauthorized persons. Sharpening Metal Cutting Blades N Use a sharpening file (special accessory) to sharpen dull cutting attachments. In case of more serious wear or nicks: Resharpen with a grinder or have the work done by a dealer - STIHL recommends a STIHL servicing dealer. N Resharpen frequently, take away as little material as possible: two or three strokes of the file are usually enough. 2 1 2 1 N Resharpen the cutters (1) uniformly - do not alter the contour or the parent blade (2) in any way. See cutting attachment packaging for additional sharpening instructions. 42 FS 510 C-M, FS 560 C-M