Sub-Zero 427R Wine Storage Installation Instructions - Page 15
Hinge Adjustment, Models 424G and 424FSG Installation, Complete the Installation
View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Models 424G and 424FSG Installation 15 subzero.com Hinge Adjustment IMPORTANT NOTE: The wine storage unit must be installed and leveled before door hinge adjustments can be made. The top and bottom cabinet hinges on models 424G and 424FSG are held in place with three permanent adjustment screws and two shipping screws. Refer to the illustrations below. The shipping screws must be removed and discarded to adjust the door alignment and fit. If no adjustments are necessary, it is recommended that all five screws remain in place. On the model 424FSG, only the bottom door hinge can be adjusted. Remove and discard the two shipping screws and loosen the three hinge screws to adjust the door. Complete the Installation When you have completed installation of the model 424G or 424FSG wine storage unit, refer to page 54 for an installation checklist and page 55 for service information. TOP DOOR HINGE SHIPPING SCREWS BOTTOM DOOR HINGE SHIPPING SCREWS Top hinge. Bottom hinge.