Sub-Zero 427R Wine Storage Installation Instructions - Page 5

Models 424G and 424FSG Installation - weight

Get Sub-Zero 427R PDF manuals and user guides View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Models 424G and 424FSG Installation 5 subzero.com Models 424G and 424FSG Installation The model 424FSG wine storage unit is designed to be attractive in a stand alone setting. Model 424G must be built in. Refer to the previous page for overall dimensions and door swing clearances for models 424G and 424FS. Make sure that the finished rough opening where the model 424G wine storage unit is to be installed is properly prepared. Refer to the illustration. The floor under the unit must be level with the surrounding finished floor. IMPORTANT NOTE: To operate properly, the door must open a minimum of 90°. Use a minimum 3" (76) filler in corner installations to assure a 90° door opening. Allow enough clearance in front of the unit for full door swing. TOOLS AND MATERIALS REQUIRED • Appliance dolly able to support 130 lbs (59 kg) and adequate manpower to handle the weight of the unit. • Phillips and slotted screwdrivers. • Allen, standard and crescent wrenches. • Various sized pliers. • 5/16" hex bolt nut driver. • Cordless drill and assorted drill bits. • Level-2' (.6 m) and 4' (1.2 m) recommended. • Masonite, plywood, pressed fiberboard, cardboard or other suitable material to protect finished flooring. • Appropriate materials to cover and protect the home and furnishings during installation. OPENING DIMENSIONS 24" (610) OPENING DEPTH 24" (610) OPENING DEPTH 341/2" (876) OPENING HEIGHT SIDE VIEW MODEL 424G TOP VIEW 24" (610) OPENING WIDTH FRONT VIEW Do not load wine into the wine storage unit until the installation is complete.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Models 424G and 424FSG Installation
5
subzero.com
Models 424G and 424FSG Installation
The model 424FSG wine storage unit is designed to be
attractive in a stand alone setting. Model 424G must be
built in. Refer to the previous page for overall dimensions
and door swing clearances for models 424G and 424FS.
Make sure that the finished rough opening where the
model 424G wine storage unit is to be installed is properly
prepared. Refer to the illustration. The floor under the unit
must be level with the surrounding finished floor.
IMPORTANT NOTE:
To operate properly, the door must
open a minimum of 90°. Use a minimum 3"
(76)
filler in
corner installations to assure a 90° door opening. Allow
enough clearance in front of the unit for full door swing.
TOOLS AND MATERIALS REQUIRED
•
Appliance dolly able to support 130 lbs
(59 kg)
and
adequate manpower to handle the weight of the unit.
•
Phillips and slotted screwdrivers.
•
Allen, standard and crescent wrenches.
•
Various sized pliers.
•
5
/
16
" hex bolt nut driver.
•
Cordless drill and assorted drill bits.
•
Level—2'
(.6 m)
and 4'
(1.2 m)
recommended.
•
Masonite, plywood, pressed fiberboard, cardboard or
other suitable material to protect finished flooring.
•
Appropriate materials to cover and protect the home
and furnishings during installation.
OPENING DIMENSIONS
24"
(610)
OPENING WIDTH
24"
(610)
OPENING
DEPTH
24"
(610)
OPENING DEPTH
34
1
/
2
"
(876)
OPENING
HEIGHT
TOP VIEW
FRONT VIEW
SIDE VIEW
MODEL 424G
Do not load wine into the wine storage unit until the
installation is complete.