Sub-Zero 427R Wine Storage Installation Instructions - Page 47
Model WS-30 Installation, Overlay Panels, Overlay Panel Specifications
View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Model WS-30 Installation 47 subzero.com Overlay Panels GRILLE PANEL ASSEMBLY Remove the grille panel assembly as described on page 39. Remove the top two corner screws and pull away the top frame. Slide the panel into position in the grille frame. If you are using a grille panel 1/4" (6) or thinner, you will need to install a filler. Reattach the top frame by reinstalling the two top corner screws. Install the grille panel assembly onto the unit, by reversing the grille removal procedure outlined on page 39. Refer to specifications for overlay grille panels and the illustrations on the previous page for the exact sizing of all three panels. Do not exceed the panel dimensions listed for the appropriate overlay grille panel you are specifying. The overlay decorative panel cannot be any larger or it may restrict the air flow to the compressor area and cause problems with the operation of the Sub-Zero unit. A solid panel cannot be installed over the glass door, as this may cause moisture to form behind the panel. Overlay Panel Specifications H A A A H A W Model WS-30 DOOR Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel WINDOW Cut-Out Location W 30" (762) 291/8" (740) 293/4" (756) H 693/4" (1772) 6815/16" (1751) 699/16" (1767) W 30" (762) 291/8" (740) 293/4" (756) H 91/4" (235) 85/16" (211) 815/16" (227) W 231/2" (597) H 631/4" (1607) A 31/4" (83) Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. Width dimensions do not vary.