Sub-Zero 427R Wine Storage Installation Instructions - Page 41

Model WS-30 Installation 41 subzero.com Door Adjustment The door of the model WS-30 can be adjusted in three ways: In and out, side to side tilt, and up and down. Regardless of the adjustment being made, start by slightly loosening the two upper hinge bolts on the upper hinge plate using a 1/2" wrench. Refer to the illustration below. IN AND OUT ADJUSTMENT Refer to the illustration for location of the bolt for in and out door adjustment. To adjust a left-hinge door; using a 5/32" allen wrench, turn the bolt clockwise to bring the handle side of the door inward, and counterclockwise to move the handle side of the door outward. Reverse the directions for a right-hinge door. DOOR HEIGHT ADJUSTMENT To adjust a left-hinge door; using a 1/4" allen wrench, turn the bolt clockwise to raise the door and counterclockwise to lower the door. Refer to the illustration below. Reverse the directions for a right-hinge door. SIDE TO SIDE TILT ADJUSTMENT Refer to the illustration for location of the bolt for side to side tilt door adjustment. To adjust a left-hinge door; using a 3/8" wrench, turn the bolt clockwise to raise the handle side of the door up and counterclockwise to tilt the handle side of the door down. Reverse the directions for a righthinge door. Door height adjustment. UPPER HINGE BOLTS IN AND OUT ADJUSTMENT Upper hinge bolts. SIDE TO SIDE TILT ADJUSTMENT Door adjustment bolts.