Sub-Zero 427R Wine Storage Installation Instructions - Page 6

Models 424G and 424FSG Installation, Electrical Requirements

Get Sub-Zero 427R PDF manuals and user guides View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Models 424G and 424FSG Installation 6 Electrical Requirements For models 424G and 424FSG, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. IMPORTANT NOTE: For model 424G, the electrical outlet must be placed so the grounding prong is to the right of the thinner blades. The outlet must be flush with the back wall. The outlet must be checked by a qualified electrician to be sure that it is wired with the correct polarity and is properly grounded. Do not use an extension cord or two-prong adapter. Electrical ground is required on this appliance. Do not remove the power cord ground prong. Electrical Requirements Power Supply Circuit Breaker Receptacle LEFT SIDE OF OPENING 2" (51) 151/2" (394) 3" (76) FRONT VIEW Location of electrical supply. 115 V AC, 60 Hz 15 amp 3-prong grounding-type

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Models 424G and 424FSG Installation
6
Electrical Requirements
For models 424G and 424FSG, the electrical supply
should be located within the shaded area shown in the
illustration. Follow the National Electrical Code and local
codes and ordinances when installing the receptacle. A
separate circuit, servicing only this appliance is required.
A ground fault circuit interrupter (GFCI) is not recom-
mended and may cause interruption of operation.
IMPORTANT NOTE:
For model 424G, the electrical outlet
must be placed so the grounding prong is to the right of
the thinner blades. The outlet must be flush with the back
wall.
Do not use an extension cord or two-prong adapter.
Electrical ground is required on this appliance. Do not
remove the power cord ground prong.
Electrical Requirements
Power Supply
115 V AC, 60 Hz
Circuit Breaker
15 amp
Receptacle
3-prong grounding-type
FRONT VIEW
15
1
/
2
"
(394)
3"
(76)
2"
(51)
LEFT SIDE
OF OPENING
Location of electrical supply.
The outlet must be checked by a qualified electrician to
be sure that it is wired with the correct polarity and is
properly grounded.