TP-Link Archer VR300 Archer VR300EU V1 User Guide - Page 19
Wireless Router Mode, Addressing Type, IPv6 Gateway, Current Connection, Connect Your - configuration
View all TP-Link Archer VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 4 Set Up Internet Connections 5. Scroll down the page, enable IPv6, and configure the IPv6 parameters. • Addressing Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC). SLAAC is the most commonly used addressing type. • IPv6 Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 address, click Advanced to reveal more settings. Check to use IPv6 specified by ISP and enter the parameters provided by your ISP. 6. Click OK to make the settings effective. Now IPv6 service is available for your network. 4. 5. Wireless Router Mode If you already have a modem or your internet comes via an Ethernet jack on the wall, you can set up the modem router as a regular wireless router to share the internet. 1. Find the WAN port (labeled as LAN4/WAN) on the modem router, and connect it to your existing modem or the Ethernet jack on the wall. Then connect the power adapter and turn on the modem router. If you connect an existing modem, reboot it to get the modem router connected to the internet. 2. Connect your computer to the modem router. For details, refer to Connect Your Modem Router. 3. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 4. Go to Advanced > Operation Mode, select the Wireless Router Mode, and click Save. The modem router will reboot. 5. Go to Basic > Internet, select the Connection Type, and enter the information provided by your ISP. 15