TP-Link Archer VR300 Archer VR300EU V1 User Guide - Page 73
How can I, do that?, Advanced, Network, Static Routing, WAN Interface
View all TP-Link Archer VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 13 How can I do that? Specify Your Network Settings static routing. Modem router Router 2 Company's server LAN: 192.168.1.1 WAN: 172.30.30.100 LAN: 192.168.1.2 172.30.30.1 Switch 192.168.1.100 My PC 1. Make sure the routers use different LAN IP addresses on the same subnet. Disable Router 2's DHCP function. 2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > Network > Static Routing. Select your current WAN Interface and click Save. 4. Click Add to add a new static routing entry. Finish the settings according to the following explanations: 69
69
Chapter 13
Specify Your Network Settings
static routing.
Company’s server
My PC
Router 2
Modem router
Switch
LAN: 192.168.1.1
192.168.1.100
LAN: 192.168.1.2
WAN: 172.30.30.100
172.30.30.1
1°
Make sure the routers use different LAN IP addresses on the
same subnet. Disable Router 2’s DHCP function.
2°
Visit
http://tplinkmodem.net
, and log in with your TP-Link ID
or the password you set for the router.
3°
Go to
Advanced
>
Network
>
Static Routing
. Select your
current
WAN Interface
and click
Save
.
4°
Click
Add
to add a new static routing entry. Finish the settings
according to the following explanations:
How can I
do that?