TP-Link Archer VR300 Archer VR300EU V1 User Guide - Page 83
Remote Management, Advanced, System Tools, Administration, Remote, Management, via HTTPS
View all TP-Link Archer VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 14 Administrate Your Network Now, you can manage the modem router over both HTTP (http://tplinkmodem.net) and HTTPS (https://tplinkmodem.net). Note: If you want that all local devices can manage the modem router, just leave the IP/MAC Address field blank. 14. 6. Remote Management By default, the remote devices are not allowed to manage the modem router from the internet. You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a more secure way to access the router. Note: If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management feature because private addresses are not routed on the internet. Follow the steps below to allow remote devices to manage the modem router over HTTPS. 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Administration page. Locate the Remote Management section. 3. Tick the check box to enable Remote Management. Enable Remote Management via HTTPS to allow for HTTPS connection. Keep the Port as the default setting. 4. Set the client device allowed for remote management. Select All to allow all remote devices to manage the modem router. If you just want to allow a specific device to manage the modem router, select Only the Following IP/MAC Address and enter the IP/MAC address of the remote device. 5. Click Save. 79