TP-Link Archer VR300 Archer VR300EU V1 User Guide - Page 56
Pre-Shared Key, Perfect Forward, Secrecy, Advanced, Perfect, Forward Secrecy
View all TP-Link Archer VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 12 VPN Server 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click Save. Note: The Status column is Down after the configuration, and it will change to UP only when Site A and Site B are communicating via the VPN connection. 3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure that Site A and Site B use the same pre-shared keys and Perfect Forward Secrecy settings. 4. Check the VPN connection. You can ping site B' LAN IP from your computer in site A to verify that the IPSec VPN connection is set up correctly. Tips: To check the VPN connection, you can do the following. 1. On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input "cmd" and hit OK. 2. In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x" can be IP address of any host in Site B). Then press [Enter]. 3. If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection is working properly now. 5. Now IPSec VPN is implemented to establish a connection. 52