TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 123

no mac address-table filtering {[ mac-addr ] [ vid vid ]} Parameter mac-addr -- The MAC address to be filtered. vid -- The corresponding VLAN ID of the MAC address. It ranges from 1 to 4094. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Add a filtering address entry of which VLAN ID is 1 and MAC address is 00:1e:4b:04:01:5d: T1500G-10MPS(config)# mac address-table filtering 00:1e:4b:04:01:5d vid 1 14.4 mac address-table notification Description The mac address-table notification command is used to configure global settings of MAC address table notification. Syntax mac address-table notification { [ global-status enable | disable ] [ table-full-status enable | disable ] [ interval time ] } Parameter global-status enable | disable -- Enable/Disable the notification function globally. table-full-status enable | disable -- Enable/Disable the MAC threshold notification. With this feature enabled, a SNMP notification is generated and sent to the network management system (NMS) when the threshold of the switch's MAC address table is reached or exceeded. interval time -- Specify the notification trap interval between each set of traps that are generated to the NMS. The interval ranges from 1 to 1000 seconds and it's 1 second by default. 110