TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 26
Accessing, Prompt, Logout or Access the, next mode, Global Configuration Mode, Interface
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Mode Accessing Path VLAN Configuration Mode Use the vlan vlan-list command to enter this mode from Global Configuration mode. Prompt Logout or Access the next mode T1500G-10MPS(config-vlan)# Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit command or the # command to return to Global configuration mode. Note: 1. The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a Telnet/SSH connection. 2. Each command mode has its own set of specific commands. To configure some commands, you should access the corresponding command mode firstly. Global Configuration Mode: In this mode, global commands are provided, such as the Spanning Tree, Schedule Mode and so on. Interface Configuration Mode: In this mode, users can configure one or several ports, different ports corresponds to different commands a). Interface gigabitEthernet: Configure parameters for an Ethernet port, such as Duplex-mode, flow control status. b). Interface range gigabitEthernet: Configure parameters for several Ethernet ports. c). Interface link-aggregation: Configure parameters for a link-aggregation, such as broadcast storm. d). Interface range link-aggregation: Configure parameters for multi-trunks. e). Interface vlan: Configure parameters for the vlan-port. VLAN Configuration Mode: In this mode, users can create a VLAN and add a specified port to the VLAN. 3. Some commands are global, that means they can be performed in all modes: show: display all information of switch, for example: statistic information, port information, VLAN information. history: Display the commands history. 13