TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 138

Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the daylight saving time from zero clock, Apr 1st to zero clock Oct 1st and the offset is 30 minutes in 2015: T1500G-10MPS(config)# system-time dst date Apr 1 00:00 2015 Oct 1 00:00 2015 30 15.5 system-time dst recurring Description The system-time dst recurring command is used to configure the recurring daylight saving time. It can be configured spanning years. To disable DST function, please use no system-time dst command. Syntax system-time dst recurring {sweek} {sday} {smonth} {stime} {eweek} {eday} {emonth} {etime} [offset] no system-time dst Parameter sweek--The start week of the daylight saving time. There are 5 values showing as follows: first, second, third, fourth, last. sday -- The start day of the daylight saving time. There are 7 values showing as follows: Sun, Mon, Tue, Wed, Thu, Fri, Sat. smonth -- The start month of the daylight saving time. There are 12 values showing as follows: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec. stime -- The start moment of the daylight saving time, HH:MM. eweek --The end week of the daylight saving time. There are 5 values showing as follows: first, second, third, fourth, last. eday -- The end day of the daylight saving time. There are 5 values showing as follows: Sun, Mon, Tue, Wed, Thu, Fri, Sat. emonth -- The end month of the daylight saving time. There are 12 values showing as following: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec. 125