TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 230
ip igmp snooping mtime, ip igmp snooping report-suppression
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
24.4 ip igmp snooping mtime Description The ip igmp snooping mtime command is used to specify member port aging time globally. The default aging time is 260 seconds. To restore the default timer, please use no ip igmp snooping mtime command. Syntax ip igmp snooping mtime mtime no ip igmp snooping mtime Parameter mtime -- Specify the aging time in seconds, ranging from 60 to 600. The default aging time is 260 seconds. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify IGMP Snooping member port aging time as 100 seconds globally: T1500G-10MPS(config)# ip igmp snooping mtime 100 24.5 ip igmp snooping report-suppression Description The ip igmp snooping report-suppression command is used enable the IGMP report suppression function. When it is enabled, the switch forwards only the first IGMP report message per mulicast group to the Layer 3 device, and the subsequent IGMP reports from the same multicast group are discarded. To disable the IGMP report suppression function and forward all the IGMP reports to the Layer 3 device, please use no ip igmp snooping report-suppression command. This function is disabled by default. Syntax ip igmp snooping report-suppression no ip igmp snooping report-suppression Command Mode Global Configuration Mode 217