TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 239
ip igmp snooping querier vlan general query
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
no ip igmp snooping querier vlan vlan-id Parameter vlan-id - VLAN ID, ranging from 1 to 4094. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the IGMP Snooping Querier function of VLAN 1: T1500G-10MPS(config)#ip igmp snooping querier vlan 1 24.16 ip igmp snooping querier vlan (general query) Description The ip igmp snooping querier vlan command is used to configure the parameters for IGMP Snooping Querier to send a general query frame. To return to the default configuration, please use no ip igmp snooping querier vlan command. Syntax ip igmp snooping querier vlan vlan-id { query-interval interval | max-response-time response-time | general-query source-ip ip-addr } no ip igmp snooping querier vlan vlan-id { query-interval | max-response-time | general-query source-ip } Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. interval -- The time interval to send a general query frame by IGMP Snooping Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds. response-time -- The maximal time for the host to respond to a general query frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds. ip-addr -- The source IP of the general query frame sent by IGMP Snooping Querier. It should not be a multicast IP or a broadcast IP. By default, it is 192.168.0.1. 226