TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 218
spanning-tree timer
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the bridge priority as 4096: T1500G-10MPS(config)# spanning-tree priority 4096 23.13 spanning-tree timer Description The spanning-tree timer command is used to configure forward-time, hello-time and max-age of Spanning Tree. To return to the default configurations, please use no spanning-tree timer command. Syntax spanning-tree timer {[ forward-time forward-time ] [ hello-time hello-time ] [ max-age max-age ]} no spanning-tree timer Parameter forward-time -- Forward Delay, which is the time for the port to transit its state after the network topology is changed. Forward Delay ranges from 4 to 30 in seconds and it is 15 by default. Otherwise, 2 * (Forward Delay - 1) >= Max Age. hello-time --Hello Time, which is the interval to send BPDU packets, and used to test the links. Hello Time ranges from 1 to 10 in seconds and it is 2 by default. Otherwise, 2 * (Hello Time + 1)