TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 265

r-event -- Rise Event, which is the index of the corresponding event which will be triggered if the sampled value is larger than the Rising Threshold. It ranges from 1 to 12. f-hold -- The falling counter value that triggers the Falling Threshold alarm, ranging from 1 to 2147483647. By default, it is 100. f-event -- Fall Event, which is the index of the corresponding event which will be triggered if the sampled value is lower than the Falling Threshold. It ranges from 1 to 12. a-type -- Alarm Type, with rise, fall and all options. Rise indicates that the alarm event will be triggered when the sampled value exceeds the Rising Threshold, fall indicates that the alarm event will be triggered when the sampled value is under the Falling Threshold, and all indicates that the alarm event will be triggered either the sampled value exceeds the Rising Threshold or is under the Falling Threshold. By default, the Alarm Type is all. owner-name -- The owner of the entry, ranging from 1 to 16 characters. By default, it is monitor. interval -- The alarm interval time, ranging from 10 to 3600 in seconds. By default, it is 1800. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure rmon alarm entries 1-3 binding with statistics entry 2, the owners as owner1 and the alarm intervals as 100 seconds: T1500G-10MPS(config)#rmon alarm 1-3 stats-index 2 owner owner1 interval 100 25.15 rmon statistics Description The rmon statistics command is used to configure the entries of SNMP-RMON statistics. To delete the corresponding entry, please use no rmon statistics command. The maximum supported entries are 1000. 252