TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 220
spanning-tree bpdufilter
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Parameter value -- The maximum number of hops that occur in a specific region before the BPDU is discarded, ranging from 1 to 40 in hop. By default, it is 20. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the max-hops of STP as 30: T1500G-10MPS(config)# spanning-tree max-hops 30 23.16 spanning-tree bpdufilter Description The spanning-tree bpdufilter command is used to enable the BPDU filter function for a port. With the function enabled, the port can be prevented from receiving and sending any BPDU packets. To disable the BPDU filter function, please use no spanning-tree bpdufilter command. Syntax spanning-tree bpdufilter no spanning-tree bpdufilter Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the BPDU filter function for port 1/0/2: T1500G-10MPS(config)# interface gigabitEthernet 1/0/2 T1500G-10MPS(config-if)# spanning-tree bpdufilter 207