TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 222
spanning-tree guard root
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the Loop Protect function for port 1/0/2: T1500G-10MPS(config)# interface gigabitEthernet 1/0/2 T1500G-10MPS(config-if)# spanning-tree guard loop 23.19 spanning-tree guard root Description The spanning-tree guard root command is used to enable the Root Protect function for a port. With the Root Protect function enabled, the root bridge will set itself automatically as ERROR-PORT when receiving BPDU packets with higher priority, in order to maintain the role of root ridge. To disable the Root Protect function, please use no spanning-tree guard root command. Syntax spanning-tree guard root no spanning-tree guard root Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the Root Protect function for port 1/0/2: T1500G-10MPS(config)# interface gigabitEthernet 1/0/2 T1500G-10MPS(config-if)# spanning-tree guard root 209