TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 257

type has a higher security than the trap type and resend and timeout need to be configured if you select this option. You can only select the trap type in Security Model v1. By default, the type of the notifications is "trap". retries -- The amount of times the switch retries an inform request, ranging from 1 to 255. The switch will resend the inform request if it doesn't get the response from the management station during the Timeout interval, and it will terminate resending the inform request if the resending times reach the specified Retry times. timeout -- The maximum time for the switch to wait for the response from the management station before resending a request, ranging from 1 to 3600 in seconds. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Add a Notification entry, and configure the IP address of the management Host as 192.168.0.146, the UDP port as 162, the User name of the management station as admin, the Security Model of the management station as v2c, the type of the notifications as inform, the maximum time for the switch to wait as 1000 seconds, and the retries time as 100: T1500G-10MPS(config)# snmp-server host 192.168.0.146 162 admin smode v2c type inform retries 100 timeout 1000 Add a Notification entry, and configure the IP Address of the management Host as fe80::1234, the UDP port as 162, the User name of the management station as admin, the Security Model of the management station as v2c, the type of the notifications as inform, the maximum time for the switch to wait as 1000 seconds, and the retries time as 100: T1500G-10MPS(config)# snmp-server host fe80::1234 162 admin smode v2c type inform retries 100 timeout 1000 244