TP-Link T1500G-8T T1500G-10PSUN V1 CLI Reference Guide Guide - Page 278
lldp med-fast-count, lldp med-status
View all TP-Link T1500G-8T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
26.8 lldp med-fast-count Description The lldp med-fast-count command is used to configure the number of the LLDP-MED frames that will be sent out. When LLDP-MED fast start mechanism is activated, multiple LLDP-MED frames will be transmitted based on this parameter. The default value is 4. To return to the default configuration, please use no lldp med-fast-count command. Syntax lldp med-fast-count count no lldp med-fast-count Parameter count -- Configure the Fast Start Count parameter. It ranges from 1 to 10. By default, it is 4. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Specify Fast Start Count as 5: T1500G-10MPS(config)# lldp med-fast-count 5 26.9 lldp med-status Description The lldp med-status command is used to enable the LLDP-MED feature for the corresponding port. After the LLDP-MED feature is enabled, the port's Admin Status will be changed to Tx&Rx. To disable the LLDP-MED feature for the corresponding port, please use no lldp med-status command. Syntax lldp med-status no lldp med-status 265