TRENDnet TV-IP322WI Users Guide - Page 53

SD Card Slot, Network Storage

Page 53 highlights

TRENDnet User's Guide SD Card Slot Micro SD slot is located at the bottom of the camera under a protective cover. Using the included security wrench to loosen the screws and remove the panel. Insert a SD card into SD card slot. Put the protective cover back to camera. TV-IP322WI Network Storage * Network Storage must be setup before it can be managed. For storage management, please refer to the next section. The camera supports two formats of network storage file systems: NFS and SMB/CIFS. NFS, Network File System, is natively supported by Linux computers and most NAS, Network Attached Storage. SMB/CIFS, Common Internet File System, is natively supported by Windows® systems and now is generally supported by Linux and OS X®. You can add up to 8 network storages for your camera. The recordings will subsequently be stored in these spaces. Save video from the first storage and then the next when the first one is full. Click on the entry to change the settings and click Save to save the settings. © Copyright 2015 TRENDnet. All Rights Reserved. Network Storage No: Type: Server Address: File Path: Capacity: File System: The sequential number of the network storage. The type of storage. Enter the IP address of your network storage. Enter the file path on the server for network storage. Enter the size of the disk space you want to assign for this storage. The minimum disk space requirement is 8GB. If you do not want to limit the size and use the full physical disk space, enter 0 in this field. Choose between NFS or CIFS for file system. If you assign the network storage on a Windows® computer, set it to SMB/CIFS. (if you use an anonymous account, please still enter a random user ID and password before saving) 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP322WI
52
SD Card Slot
Micro SD slot is located at the bottom of the camera under a protective cover.
Using
the included security wrench to loosen the screws and remove the panel. Insert a SD
card into SD card slot. Put the protective cover back to camera.
Network Storage
*
Network Storage
must be setup before it can be managed. For storage management,
please refer to the next section.
The camera supports two formats of network storage file systems: NFS and SMB/CIFS.
NFS, Network File System, is natively supported by Linux computers and most NAS,
Network Attached Storage. SMB/CIFS, Common Internet File System, is natively
supported by Windows® systems and now is generally supported by Linux and OS X®.
You can add up to 8 network storages for your camera. The recordings will subsequently
be stored in these spaces. Save video from the first storage and then the next when the
first one is full. Click on the entry to change the settings and click
Save
to save the settings.
Network Storage
No:
The sequential number of the network storage.
Type:
The type of storage.
Server Address:
Enter the IP address of your network storage.
File Path:
Enter the file path on the server for network
storage.
Capacity:
Enter the size of the disk space you want to assign
for this storage. The minimum disk space
requirement is 8GB. If you do not want to limit the
size and use the full physical disk space, enter 0 in
this field.
File System:
Choose between NFS or CIFS for file system. If you
assign the network storage on a Windows®
computer, set it to SMB/CIFS. (if you use an
anonymous account, please still enter a random
user ID and password before saving)