TRENDnet TV-IP322WI Users Guide - Page 6
Plan for Installation
View all TRENDnet TV-IP322WI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
TRENDnet User's Guide Warnings: For PoE user, it is recommended to use the PoE injector or an IEEE 802.3at compliant PoE switch. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. Disassembling the product will void the warranty and may cause harm or injury. The installation should be done by a qualified service person and should conform to all construction and electric regulations and other local codes. Cautions: Make sure the power supply voltage is correct before using the camera. Do not drop the camera or subject to physical shock. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt. Do not aim the camera lens at the strong light such as the Sun or an incandescent lamp. Strong light can damage the camera sensor. The sensor may be burned out by a laser beam. When any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot, cold temperatures (the operating temperature should be between -30°C to 65°C), dusty or damp environment, and do not expose it to high electromagnetic radiation. To avoid heat accumulation, good ventilation is required for a proper operating environment. While shipping, the camera should be packed in its original packing. Use water proof tape to cover all the wires, cables which will be exposed outdoor after the camera installation. TV-IP322WI There are a number of factors involved in successful camera installation. Follow the suggested installation steps and go through the check lists. This guide will help you to make your camera installation smooth and easy. Plan for installation location Setup Camera with CD Hardware Installation Plan for Installation Viewing angle The TV-IP322WI is a bullet camera with a focused viewing angle (71.6 horizontal) that provides non-distorted and detailed images. Choose the location where has good angle to shoot the image you expect to see. The motion detection area should also be considered when installing the camera. Weather Conditions The camera is an outdoor dome camera, which fits most installations indoor and outdoor. The camera can work under a wide range of weather conditions. For severe weather conditions. Using the camera in milder weather conditions will help extend the camera's life and preserve the quality of the camera image. Moisture: Avoid damp or moist environments whenever you can. The camera is an IP66 grade water proof camera, and it will work in moist environments. However, rain may affect the picture quality, especially at night, water may reflect the light from the infrared illumination and degrade picture quality. Temperature: Camera works within a specified temperature range. Areas with severe temperatures should be avoided when installing the camera. It's recommended that you use an enclosure with a heater and blower if you plan on using this camera outside of the specified temperature range. © Copyright 2015 TRENDnet. All Rights Reserved. 5