Thermador UCVP36XS Installation Instructions - Page 18
Gas cooktops only, Install gas cooktop seal kit UCV30ST, UCV36ST purchase separately
View all Thermador UCVP36XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
I N S TA L L AT I O N Gas cooktops only: Install gas cooktop seal kit (UCV30ST, UCV36ST) (purchase separately) Available for application with gas cooktops - where proper sealing is required and holes are required in cabinet base. Kit includes trim seal, toe-kick cover grille, and cabinet hole cover grille. 2 No. 10 x 0.500 WOOD SCREW 3. Extend upper support brackets and attach to sides of cabinet with (2) screws through each bracket. Installations using lexible blower only: (4) BOLTS 1 FLEXIBLE BLOWER 4. Extend blower support legs and secure them to bottom of cabinet with a screw through each leg. Tighten (4) bolts to secure support legs to lex blower. B B C C A B B A B B Cut one 18¼" x 2½" (464 mm x 64 mm) OPENING (A)* in the cabinet toe kick. -- or -Cut one 18¼" x 2½" (464 mm x 64 mm) OPENING (B) in the cabinet side or back. Mount one of the two metal grilles over this opening, using two screws provided. C If you chose to cut an opening in the toe kick - you must cut another 18¼" x 2½" (464 mm x 64 mm) OPENING (C)* in the cabinet loor. Mount the second metal grille over this opening. * IMPORTANT NOTE When using toe kick opening (A) with opening (C) in cabinet loor: Air must be able to low freely between these two openings - and not restricted by cabinet structure or any other obstruction. Page 18