Tripp Lite S3M60K60K6T Owners Manual S3M 3-Phase UPS Systems for Models S3M25- - Page 17
BAT_SW: Battery Breaker Status Detect
View all Tripp Lite S3M60K60K6T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. Installation and Wiring 2 3 10 11 4 5 19 6 12 Backfeed Dry contact 7 8 9 15 16 17 18 Accessory Slot SNMP 13 14 Figure 3-4: Rear View Detail, Models S3M50K and S3M60K 1 LCD Panel 11 LBS Port 2 Battery Temperature Sensor (NTC) 12 Cold Start Button 3 RS-485 Port (MODBUS or Battery Thermostat) 13 Accessory Slot 4 USB Port 14 WEBCARDLX Network Management Card 5 RS-232 Port 15 Mains Breaker 6 BAT_SW: Battery Breaker Status Detect* 16 Bypass Breaker 7 Backfeed Protection Port 17 Maintenance Breaker 8 MAINTAIN-AUXSWS Port** 18 Output Breaker 9 REPO Port 19 Terminal Block 10 Parallel Port * Battery Breaker Status Detect. Connect the battery breaker auxiliary contact to the BAT_SW port on the UPS and enable the function. The UPS will detect the battery breaker status (closed or open) and will display it on the LCD (Dry BATT Breaker). ** External Maintenance Breaker Status Detect. Connect the external maintenance breaker auxiliary contact to the MAINTAIN-AUXSWS port on the UPS and enable the function. The UPS will detect the external maintenance breaker status (closed or open) and display it on the LCD (Dry MBS Breaker). 17