Tripp Lite S3M60K60K6T Owners Manual S3M 3-Phase UPS Systems for Models S3M25- - Page 5

2. Important Safety Warnings SAVE THESE INSTRUCTIONS This manual contains important instructions and warnings that should be followed during the installation and maintenance of all Tripp Lite SmartOnline S3M 3-Phase 25kVA, 30kVA, 50kVA, 60kVA, 80kVA and 100kVA UPS Systems. Failure to heed the warnings may affect your warranty. 2.1 UPS Location Warnings • Install the UPS indoors, away from heat, direct sunlight, dust and excess moisture or other conductive contaminants. • Install the UPS in a structurally sound area. The UPS is extremely heavy; take care when moving and lifting the unit. • Only operate the UPS at indoor temperatures between 0° C and 40° C. • Optimum UPS performance and maximum battery life is obtained when the operating temperature is maintained between 17° C and 25° C. • Ensure the installation area has sufficient space for maintenance and ventilation of the UPS system. Maintain a minimum clearance of 20 in. (500 mm) from the rear and both sides of the UPS and 23.6 in. (600 mm) from the front for maintenance, access and ventilation. • Do not install the UPS near magnetic storage media, as this may result in data corruption. 2.2 Equipment Connection Warnings • Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. • CAUTION! Risk of electrical shock - Hazardous live parts inside the unit are energized from the external battery supply even when the input AC power is disconnected from an AC supply. 2.3 Battery Warnings This UPS contains LETHAL VOLTAGES. The UPS is designed to supply power, even when disconnected from utility power. Only AUTHORIZED SERVICE PERSONNEL should access the interior of the UPS after disconnecting utility and DC power. Batteries present a risk of electrical shock and burns from high short-circuit current. Battery connection or replacement should be performed only by qualified service personnel, observing proper precautions. Turn off the UPS before connecting or disconnecting external batteries. Use tools with insulated handles. Do not open the batteries. Do not short or bridge the battery terminals with any object. • The batteries are recyclable. Refer to local codes for disposal requirements or visit tripplite.com/support/recycling-program for recycling information. • Do not dispose of the batteries in a fire, mutilate the batteries or open the battery coverings. Escaping electrolytes may be toxic and cause injury to skin and eyes. • Do not disconnect the batteries while the UPS is in battery mode. • Disconnect the charging source prior to connecting or disconnecting terminals. • The following precautions should be observed: 1) Remove watches, rings and other metal objects. 2) Use tools with insulated handles. 3) Wear rubber gloves and electrical-grade boots. 4) Use an electrical-grade rubber mat while servicing batteries. 5) Do not lay tools or metal parts on top of batteries or battery cabinets. 5