Western Digital My Cloud EX2 Ultra User Manual - Page 16
Getting Started, Installing Drives in the Driveless Model
View all Western Digital My Cloud EX2 Ultra manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
GETTING STARTED 3 Getting Started Installing Drives in the Driveless Model Physically Connecting the Device Getting Started Using Online Setup Software Getting Started Without Online Setup Software Accessing Content It's easy to set up the My Cloud EX2 Ultra Private Cloud Storage device -- all you have to do is unpack your device, connect it, and wait for the Power LED on the front of your device to turn a solid blue. Then, download and run the quick setup software, available at http://www.wd.com/setup. Note: For information about safely shutting down and disconnecting the device, see "Utilities" on page 92 Important: To avoid electrostatic discharge (ESD) problems, ground yourself by touching metal before handling the device. Installing Drives in the Driveless Model Important: Following are instructions for installing drives in My Cloud EX2 Ultra models that come without drives. You may use a drive made by WD or one made by another company. For a list of compatible drives, go to http://products.wdc.com/. Important: Make sure the device is not connected to power or to the network.To avoid electrostatic discharge (ESD) problems, ground yourself by touching metal before handling the device. Note: For further instructions on how to remove and replace a faulty drive, or to prepare and insert a non-WD drive see "Replacing a Drive" on page 100. MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE 11 USER MANUAL