Western Digital WDBACG0020HCH-NESN User Manual - Page 16
Physically Connecting the Drive, Important, WARNING
View all Western Digital WDBACG0020HCH-NESN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Physically Connecting the Drive 4 2 1 3 MY BOOK LIVE USER MANUAL Important: To avoid overheating, make sure the drive is upright as shown in the illustration above and nothing is blocking or covering the slots and openings on the top and bottom of the drive. In the event of overheating, the device will perform a safe shutdown, interrupting all processes currently being performed. If this occurs, data may be lost. Follow the steps below to connect the My Book Live to a home or small office network. 1. Connect one end of the Ethernet cable into the Ethernet port located on the back of the drive. WARNING! To meet Class B emission standards, use the shielded Ethernet cable provided. 2. Connect the other end of the Ethernet cable directly into a router or network switch port. 3. Connect the end of the adapter into the power supply socket on the back of the drive. 4. Plug the power adapter into a power outlet. The unit powers up automatically. Important: Wait for the My Book Live drive to finish powering up (approximately three minutes) before configuring the drive. You will know it is ready when the LED stops flashing and turns solid green (normal) or blue (standby). CONNECTING THE DRIVE AND GETTING STARTED - 11