Xerox 3100MFPX User Guide - Phaser 3100 MFP/S - Page 29

4 - Parameters/Setup Phaser 3100MFP/S Parameters/ Setup You can setup your machine as you like depending on the use. In this chapter you will find descriptions of the functions. You can print the functions guide and the current setup of your machine. Note Your machine is continuously being updated, new functions are regularly made available. To benefit, visit our website www.xerox.com. You can also use the update function available with the Xerox Companion Suite software to download the latest online updates (see Firmware update, page 49). Language This setting enables you to choose the menu language of your choice. By default, the machine is set to English. To select the language: 203 - SETUP / GEOGRAPHICAL / LANGUAGE 1 Press , enter 203 using the keypad. 2 Select the required language using and , then press the OK key to confirm. 3 To exit this menu, press . Parameter Description 8 - Eco energy Choosing the printer standby delay: the printer will switch to standby after a delay (in minutes) of NON-operation or during the period of time of your choice. Note: you can also access this parameter by pressing the key from the idle screen. 80 - Toner save Makes printing lighter to save toner cartridge ink. 90 - RAW Port RAW network print port connection. 91 - Printer error timeout Time-out before document being printed is deleted following a print error in PC print mode. 92 - Printer wait timeout Wait time-out for data from PC before the task is deleted in PC print. 93 - Replace format Page size change. This parameter allows you to print a LETTER size document on A4 pages using the LETTER/A4 setting. 96 - NBR. WEP Keys Number of WEP keys allowed (from 1 to 4). Printing the functions guide Technical Parameters As delivered your machine is preset by default. However, you may adjust it to meet your requirements by resetting the technical parameters. To set the technical parameters: 29 - SETUP / TECHNICALS 1 Press , enter 29 using the keypad. 2 Select the desired parameter and confirm with OK. 3 With the keys or , modify the parameter settings by following the table below and press OK. Important Printing is not possible on A5 (or Statement) paper size. 51 - PRINT / FUNCTIONS LIST Press , enter 51 using the keypad. The printing of the functions guide starts. Note You can also access the PRINT menu by pressing the button. Print the list of setups Important Printing is not possible on A5 (or Statement) paper size. To print the list of setups: 56 - PRINT / SETUP Press , enter 56 using the keypad. - 25 -