Xerox 3100MFPX User Guide - Phaser 3100 MFP/S - Page 43

Connections - xp driver

Get Xerox 3100MFPX - Phaser B/W Laser PDF manuals and user guides
UPC - 095205741964
View all Xerox 3100MFPX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

8 - PC Features Installing the drivers manually You can install the printer and scan drivers manually without running any setup software. Note This installation mode is only possible on Windows 2000, XP and Vista. 1 Locate your USB cable connectors and connect as shown below on the picture. click on NEXT. Phaser 3100MFP/S 2 Power on your machine. The PC detects the device. 3 Click on LOCATE AND INSTALL DRIVER SOFTWARE (RECOMMENDED). The following screen appears: 6 A screen informs you that the drivers have been installed. Click on the CLOSE button. You can now use the machine to print and scan your documents. Connections Make sure that your machine is powered off. The connection between the PC and the machine requires a USB 2.0 shielded cable no more than 3 meters long. It is recommended to install the Xerox Companion Suite software first and then to connect the USB cable to your machine (see Installing the full software package, page 36). Important If you connect the USB cable before installing the Xerox Companion Suite software the recognition system (plug and play) identifies automatically that new hardware has been added. To start your machine drivers installation, refer to paragraph Installing the drivers manually, page 39 and follow the instructions on screen. When you use this procedure, only printing and scanning functions are activated. 1 Locate your USB cable connectors and connect as shown below on the picture. 4 Open the CD-ROM drive, insert the installation CDROM and close the drive. The drivers are detected automatically. 5 Select XEROX PHASER 3100MFP in the list and - 39 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Phaser 3100MFP/S
- 39 -
8 - PC Features
Installing the drivers manually
You can install the printer and scan drivers manually
without running any setup software.
1
Locate your USB cable connectors and connect as
shown below on the picture.
2
Power on your machine.
The PC detects the device.
3
Click on
L
OCATE
AND
INSTALL
DRIVER
SOFTWARE
(
RECOMMENDED
)
.
The following screen appears:
4
Open the CD-ROM drive, insert the installation CD-
ROM and close the drive.
The drivers are detected automatically.
5
Select X
EROX
PHASER 3100MFP in the list and
click on
N
EXT
.
6
A screen informs you that the drivers have been
installed. Click on the
C
LOSE
button.
You can now use the machine to print and scan your
documents.
Connections
Make sure that your machine is powered off. The
connection between the PC and the machine requires a
USB 2.0 shielded cable no more than 3 meters long.
1
Locate your USB cable connectors and connect as
shown below on the picture.
Note
This installation mode is only possible
on Windows 2000, XP and Vista.
Important
It is recommended to install the
Xerox Companion Suite software
first and then to connect the USB
cable to your machine (see
Installing the full software
package,
page 36).
If you connect the USB cable before
installing the Xerox Companion
Suite software the recognition
system (plug and play) identifies
automatically that new hardware has
been added. To start your machine
drivers installation, refer to
paragraph
Installing the drivers
manually
, page 39 and follow the
instructions on screen. When you
use this procedure, only printing and
scanning functions are activated.