Yamaha 9000Pro Owner's Manual - Page 103
Parameters, E1: EG/VIB, E2: CTRL Control
View all Yamaha 9000Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Creating Plug-in Custom Voices I Parameters The explanations here apply to step #7 on page 101. G E1: EG/VIB The explanations of each parameter are same as Easy Editing in the Custom Voice Creating section on page 93. Select the desired menu. Select this to go to the Store display (step #8 on page 101). G E2: CTRL (Control) Select the desired menu. Sets the depth and the offset of the Initial Touch Sensitivity. Select this to go to the Store display (step #8 on page 101). These determine how the various controllers (MODULATION Wheel, keyboard After Touch, Assignable Controller) affect the sound. You can set the amount of Filter and Amplitude change, as well as the depth of LFO modulation of pitch (PMOD), filter (FMOD) and volume (AMOD). For more information on LFO, see page 98. This determines which Control Change number will be used for Assignable Controller 1. This function is available only for Plug-in Boards that support the Assignable Controller (AC1). In this example, the PLG150-AN is installed to the 9000Pro and the MODULATION Wheel is used to change the sound of the Plug-in voice. Make the following settings on the 9000Pro: 1) Set the AC1 CTRL No. to Mod. 2) Select the desired AC1 Control Parameter (e.g., P:34) in the Native Part Parameter display. 3) Adjust the AC1 Control Depth in the Native Part Parameter display. When you play the keyboard and move the MODULATION Wheel, the sound of the Plug-in voice changes according to the AC1 Control parameter you selected in step #2. Reference 103 101