Yamaha 9000Pro Owner's Manual - Page 174
Preset MIDI templates Factory Set
View all Yamaha 9000Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
MIDI Functions The 9000Pro offers a range of MIDI functions that allow it to be used effectively in even the most sophisticated MIDI systems. Basic Procedure DISK/ SCSI MENU FUNCTION MIDI 2 Select the desired template. 1 Press the [MIDI] button. 3 Select this to call up the MFC10 display. 3 Select this to call up the SETUP display. Preset MIDI templates (Factory Set) All Parts Transmits all parts including R1, R2, R3 and Left. KBD & ACMP Transmits Upper and Lower keyboard performance data, rather than that of the individual parts (R1, R2, R3, and Left). Master KBD1 The 9000Pro functions as a master keyboard for controlling external tone generators or other devices. Master KBD2 The 9000Pro functions as a master keyboard which does not transmit aftertouch data. Clock Ext.A MIDI IN A port receives MIDI clock data, allowing you to synchronize the 9000Pro with an external MIDI device. MIDI Accord1 An ideal setup for controlling the keyboard and accompaniment by a MIDI accordion. MIDI Accord2 The chord and bass buttons on a MIDI accordion are used to control the accompaniment, as well as play the chord and bass parts. MIDI Pedal1 A MIDI pedal keyboard connected to the MIDI IN B port controls the bass note of the accompaniment. MIDI Pedal2 A MIDI pedal keyboard connected to the MIDI IN B port plays the bass part. MIDI OFF No MIDI signals are sent or received. 4 Select the desired menu. 4 Select the desired menu to be set by using the [NEXT] or [BACK] button. 6 Use this menu to store your settings. Refer to page 177. 5 Set the parameter of the selected menu. Refer to page 178. 5 Set the parameter of the selected menu. Refer to pages 175, 176, 177. • Since all MIDI settings data is stored to Flash ROM, any data in the MIDI settings location will be erased and replaced by your new settings. This includes the factory programmed preset MIDI settings. If you've deleted the factory-set data, you can use the Restore function (page 154) to load a copy of it from the included disks (page 6). The operations for each function corresponding to step #5 or #6 are covered in the following explanations. 174 Reference 172