Yamaha 9000Pro Owner's Manual - Page 181
Optional Plug-in Board Installation
View all Yamaha 9000Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Installing Optional Hardware Optional Plug-in Board Installation A variety of optional Plug-in boards sold separately let you expand the voice library of your instrument. The following types of Plug-in boards can be used with your instrument. • PLG150-AN • PLG100-VL • PLG100-DX • PLG100-XG • PLG150-PF • PLG150-VL • PLG150-DX CAUTION • When inserting Plug-in boards and connecting cables, make sure that you check that they are inserted and connected properly. Improperly inserted Plug-in boards and cables may cause faulty contacts and an electrical short circuit which may cause damage or result in a malfunction. • After mounting the Plug-in board, be sure to tighten the screws as directed so it is completely stable and does not move in any way. 1 Turn the 9000Pro power off, and disconnect the AC power cord. Also, if the keyboard is connected with other external device(s), disconnect the device(s). 2 Turn the 9000Pro face down on a blanket or some soft surface, giving you direct access to the bottom of the instrument. Plug-in board/Hard disk cover 3 Move to a position facing the front panel of the keyboard, and remove the eight screws from the Plug-in board/Hard disk cover with a Phillips screwdriver. Do not remove the other screws. Black screws • Keep the removed (8) screws in a safe place. They will be used when attaching the Plugin board/Hard disk cover to the keyboard again. Plug-in board/Hard disk cover 4 Remove the Plug-in board/Hard disk cover. WARNING • In order not to drop any screws inside the 9000Pro, keep the Plug-in Board and cover away from the 9000Pro in the following steps #5 - #7. Reference 181 179