Yamaha 9000Pro Owner's Manual - Page 178
MFC10 Settings
View all Yamaha 9000Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
MIDI Functions MFC10 Settings Various functions can be assigned to an optional Yamaha MFC10 MIDI Foot Controller connected to the 9000Pro. Connect the MFC10 to the MIDI B terminals and set the MIDI channel for the MFC10 messages by following the on-screen instructions. The 9000Pro provides two ways to set: Easy Setup and Full Setup. MFC10 MIDI OUT MIDI cable MIDI IN MIDI IN MIDI OUT 9000Pro • When the MIDI B terminals are connected to the MFC10, the functions of the MIDI B port are limited. For details, refer to the MIDI Data Format (page 228). The explanations here apply to step #5 of the Basic Procedure on page 174. I Easy Setup Follow the on-screen instructions to call up the template display as shown below. PAGE CONTROL BACK NEXT Select a template. 178 Reference Press the [NEXT] button to enable the selected Easy Setup template. Disconnect the MIDI cable from the MIDI OUT B terminal and connect it to the MFC10 Foot Controller. • When setting up the MFC10 from the 9000Pro, a MIDI cable must be connected from the MIDI OUT of the 9000Pro to the MIDI IN of the MFC10. However, you should disconnect this cable when using the MFC10, since extraneous MIDI messages may be transmitted from the 9000Pro. • To exit from the MFC10 play mode, select the MIDI Template display (page 174) and press the [CANCEL] LCD button. • The MFC10 play mode on/off status is retained in Flash ROM and is maintained even when the power is turned off. 176