Yamaha 9000Pro Owner's Manual - Page 66

Plug-in Voices Plug-in Manager This function lets you manage the Plug-in Voice related parameters as disk files. The following three types of parameters (described in the illustration on page 64) are available: Plug-in Custom Voices Native System Parameters Board Custom Voices These can be edited via the Plug-in Custom Voice Creator function (page 102). These can be edited via the Native System Parameter Edit function (page 105). Available parameters vary according to the installed board. These can be edited via your computer. See pages 100 and 106 for details. Basic Procedure 1 Select a Plug-in Voice category. 2 Select this to call up the Plug-in Manager display. 3 Select the desired function. 4 Execute the selected function. The operations for each function corresponding to step #4 are covered in the following explanations. Quick Guide I Load Plug-in Custom Voice Step#3 on page 42 The explanations here apply to step #4 above. G All The three types of parameters explained in the chart above can all be loaded together. Use the instructions here for loading in step #3 of the Quick Guide on page 42. Select this to display the property of the selected file. PAGE CONTROL BACK NEXT If an optional SCSI device is connected or the optional internal hard disk is installed, select the appropriate device. See page 150 for details. Select the file to be loaded. See page 151 for details on directory/file selection. 66 Reference PAGE CONTROL BACK NEXT 64