Yamaha 9000Pro Owner's Manual - Page 182
Attach the Plug-in Board to the Plug-in board stand, As required
View all Yamaha 9000Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Installing Optional Hardware 5 Turn over the Plug-in board/Hard disk cover. This is the location for the Hard disk unit. See page 184. Plug-in board stand Plug-in board/Hard disk cover 6 Attach the Plug-in Board to the Plug-in board stand 6-[1] Remove the four screws from the Plug-in stand with a Phillips screwdriver. Do not remove the other screws. First board Gold color screws 6-[2] Attach the Plug-in board to the Plug-in board stand using the four screws removed in the previous step (6-[1]). Gold color screws Plug-in board Plug-in board connector If you are installing a second board, go on to step #7 below. If you are installing only one board, go on to step #8. 7 As required, attach another Plug-in board to the Plug-in board stand. .... Second board 7-[1] Remove the four screws from the Plug-in stand and remove the Plug-in stand from the cover. Do not remove the other screws. Gold color screws 7-[2] Attach another Plug-in board by turning over the Plug-in board stand and using the same operations in steps 6-[1] and 6-[2]. When turning over the board, let it rest on a soft surface. Gold color screws Plug-in board stand 7-[3] Attach the Plug-in board stand to the Plug-in board/Hard disk cover with the four screws removed in step 7-[1]. Gold color screws Plug-in Board (second board) 182 Reference Plug-in board/Hard disk cover Plug-in Board (first board) 180