Yamaha 9000Pro Owner's Manual - Page 141

Multi Pad Creator The 9000Pro has 58 recordable banks that you can use to store your own Multi Pad phrases. These original Multi Pads can be played and used in the same way as the presets. Multi Pad data can also be saved to and loaded from disk. Basic Procedure 1 Press the [DIGITAL RECORDING] button. 2 Select "MULTI PAD CREATOR." Use the [NEXT] or [BACK] button. 3 Select a menu. Select this to call up the Step Recording display. Select this to name the Multi Pad Bank. Select this to store the recorded pad data to Flash ROM. See the "CAUTION" notes below. Select this to engage the Record standby mode (synchronized standby). Select a Multi Pad Bank. 4 Record/Edit Multi Pad data. Select a Multi Pad number. 5 Store the created pad to Flash ROM. (See "NOTE" below) 6 Exit from the Digital Recording mode. The operations for each function corresponding to step #4 are covered in the following explanations. Since newly created Multi Pad data is stored to Flash ROM, any pre-programmed data in the selected Multi Pad location will be erased and replaced by your new settings. This includes all of the factory programmed Multi Pad banks. If you've deleted the factory-set data, you can use the Restore function (page 154) to load a copy of it from the included disks (page 6). BANK 01 1 2 3 4 Multi Pad banks 60 banks in Flash ROM 58 banks can be replaced by the new created pad data. For details about Flash ROM, refer to "Memory Structure" on page 54. CAUTION • The recorded data of the Multi Pads is stored together in a group of 58 banks in the Flash ROM. For this reason, you should be careful when making edits and storing your edits, since all 58 banks will be overwritten with the new data. • Multi Pad banks #59 and #60 contain specially programmed presets for sending MIDI control messages (page 77) and changing the Scale Tuning settings (page 158), respectively. You cannot store your custom Multi Pad data to these banks. Reference 141 139