Yamaha CVP-79A Owner's Manual - Page 100
Midi 3
View all Yamaha CVP-79A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
The Utility Functions MIDI 3 The MIDI 3 function page contains the TRANSPOSE and SEND parameters which determine whether MIDI note data will be affected by the Transpose setting (page 91), and whether the ABC, rhythm, and harmony data will be transmitted via the MIDI OUT terminal. s Transpose ...The RECEIVE parameter determines whether MIDI note pitch received by the Clavinova will be affected by the setting of the Transpose function (see page 91), while the SEND parameter determines whether MIDI note pitch transmitted by the Clavinova will be affected by the setting of the Transpose function. Press the RECEIVE or SEND LCD button to alternately turn transposition of received or transmitted MIDI data ON and OFF. • The actual note number received or transmitted is not affected. The transposition is produced by the MIDI control change RPN coarse tune data. • The MIDI Transpose settings are retained in memory even when the power is turned off if the BACKUP page MIDI parameter is turned ON (page 107), otherwise the RECEIVE parameter is turned On and the SEND parameter is turned OFF. s Send ...These parameters determine whether MIDI data corresponding to ABC/rhythm and harmony playback will be transmitted via the MIDI OUT terminal. Press the ABC&RHY or HARMONY button to alternately turn transmission of the corresponding data ON (9-16ch / 6-8ch) or OFF. When on, the ABC and rhythm data is transmitted on MIDI channels 9 through 16, and the harmony data is transmitted on channels 6 through 8. • The Send settings are retained in memory even when the power is turned off if the BACKUP page MIDI parameter is turned ON (page 107), otherwise both parameters are turned OFF. • If you intend to send the ABC/rhythm or harmony data via MIDI, it is a good idea to set the BASIC and LEFT/2 channels (page 94) to the different channels than the ones used for ABC/ rhythm (9...16) and harmony (6...8) data to avoid data conflict problems. • If either of these parameters is on, the ABC/rhythm and/or harmony data will be sent even if the BASIC send channel is turned OFF. 97