Yamaha CVP-79A Owner's Manual - Page 129
MIDI Data Format, MIDI-Datenformat, Format des donées MIDI, Formato de datos MIDI
View all Yamaha CVP-79A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
MIDI Data Format / MIDI-Datenformat / Format des donées MIDI / Formato de datos MIDI ○ 1.2.21.3 All Notes Off Switches off all of the channel's "on" notes. Any notes being held by HOLD1 or SOSTENUTO continue to sound until HOLD1/SOSTENUTO goes off. 1.2.21.4 Omni Off Same processing as for All Notes Off. 1.2.21.5 Omni On Same processing as for All Notes Off. 1.2.21.6 Mono Same processing as for All Sound Off. 1.2.21.7 Poly Same processing as for All Sound Off. 1.3 Program Change If the Program Change Filter in Function [MIDI 2] is set to "ON" transmission and reception are disabled. 1.4 Pitchbend 2. System Exclusive Messages 2.1 Parameter Change The CVP 79A/69/69A/59S models support the following Parameter Change messages. [UNIVERSAL REALTIME MESSAGE ] 1) Master Volume [UNIVERSAL NON-REALTIME MESSAGE ] 3) General MIDI Mode On [XG NATIVE ] 1) XG System on 2) XG System Data parameter change 3) Multi Effect1 Data parameter change 4) Drum Setup Data parameter change [Others] 1) Master tuning 2) Channel Detune 3) Volume & Expression Realtime Control off 2.1.2 Universal Realtime Message 2.1.2.1 Master Volume 11110000 F0 01111111 7F 01111111 7F 00000100 04 00000001 01 0sssssss *SS 0ttttttt TT 11110111 F7 or 11110000 F0 01111111 7F 0xxxnnnn XN 00000100 04 00000001 01 0sssssss SS 0ttttttt TT 11110111 F7 = Exclusive status = Universal Realtime = ID of target device = Sub-ID #1=Device Control Message = Sub-ID #2=Master Volume = Volume LSB = Volume MSB = End of Exclusive = Exclusive status = Universal Realtime = When N is received N=0~F, whichever is received. x = don't care = Sub-ID #1=Device Control Message = Sub-ID #2=Master Volume = Volume LSB = Volume MSB = End of Exclusive The volume for all channels will be changed. *Hexadecimal representation of 0sssss ss. (Same below) 2.1.3 Universal Non-Realtime Message 2.1.3.1 General MIDI Mode On 11110000 F0 01111110 7E 01111111 7F 00001001 09 00000001 01 11110111 F7 or 11110000 F0 01111110 7E 0xxxnnnn XN 00001001 09 00000001 01 11110111 F7 = Exclusive status = Universal Non-Realtime = ID of target device = Sub-ID #1=General MIDI Message = Sub-ID #2=General MIDI On = End of Exclusive = Exclusive status = Universal Non-Realtime = When N is received N=0~F, whichever is received. X = don't care = Sub-ID #1=General MIDI Message = Sub-ID #2=General MIDI On = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. 2.1.4 XG Native Parameter Change 11110000 01000011 0001nnnn 01001100 0aaaaaaa 0aaaaaaa 0aaaaaaa 0ddddddd | 11110111 F0 43 1n 4C aaaaaaa aaaaaaa aaaaaaa ddddddd | F7 Exclusive status YAMAHA ID When n is received n=0~F, whichever is received. When n is transmitted n always=0. Model ID of XG Address High Address Mid Address Low Data End of Exclusive Data size must match parameter size (2 or 4 bytes). 2.1.4.1 XG System On 11110000 F0 01000011 43 0001nnnn 1N 01001100 4C 0aaaaaaa 00 0aaaaaaa 00 0aaaaaaa 7E 00000000 00 11110111 F7 Exclusive status YAMAHA ID When N is received N=0~F, whichever is received. When N is transmitted N always=0. Model ID of XG Address High Address Mid Address Low Data End of Exclusive When the XG System On message is received, the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. 2.1.4.2 XG System Data parameter change See Tables 1-1, 1-2. 2.1.4.3 Multi Effect1 Data parameter change See Tables 1-1, 1-3. 2.1.4.4 Multi Part Data parameter change See Tables 1-1, 1-4. 2.1.4.5 Drum Setup Data parameter change See Tables 1-1, 1-5. If operation is in XG mode, this message reinitializes all drum setup parameters. The drum setup will not be reset if any changes are made from the CVP 79A/69/69A/ 59S front panel. 126