Yamaha CVP-79A Owner's Manual - Page 68

Disk Orchestra Collection & Song Playback Part Assignment for Original Song Playback Before an original song disk is played, specify the tracks to be turned on and off by the PART 1 and PART 2 LCD buttons via the SONG PLAY [PART ASSIGN] display. Use the PAGE buttons to select the SONG PLAY [PART ASSIGN] display (SONG PLAY page 6), then use the PART 1 and PART 2 parameters to assign the desired tracks to the corresponding parts. For either part the corresponding v and w buttons can be used to select a track, or the data dial or [+]/[-] buttons can be used once the parameter is selected. • The [PART ASSIGN] display will not appear when Disk Orchestra Collection or Disklavier data (see "Playing Other Types of Music Data", page 71) is being played. The default settings are: PART 1 = Track 1, PART 2 = Track - - (off). Tracks 1 through 16 can be selected for both parts 1 and 2, and part 2 can additionally be turned off. The same track cannot be assigned to both parts. Overall Song Playback Volume Control The ABC/SONG VOLUME control can be used to control the overall volume of song playback. Whenever a song is first selected, however, the maximum volume setting (=standard volume level setting) is recalled regardless of the position of the ABC/SONG VOLUME control. The song playback volume can then be adjusted as required. VOLUME MASTER VOLUME ABC/SONG VOLUME MAX MAX • If ABC is turned on during the playback of an original song that was recorded without ABC, the ABC/SONG VOLUME control will affect the ABC sound rather than the song playback sound. • ABC cannot be used during playback of a song recorded with ABC or Disk Orchestra Collection playback. MIN MIN 65