Yamaha CVP-79A Owner's Manual - Page 127

MIDI Data Format / MIDI-Datenformat / Format des If you're already very familiar with MIDI, or are using a computer to control your music hardware with computer-generated MIDI messages, the data provided in this section can help you to control the Clavinova. Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Hardware-Steuerung einsetzen, werden Ihnen die nachfolgend aufgeführten Daten bei der Steuerung des Clavinovas wahrscheinlich hilfreich sein. Si vous vous êtes déjà familiarisés avec l'interface MIDI, ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous aideront à commander le Clavinova. Si ya está muy familiarizado con MIDI o si está usando una computadora para controlar su música con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la Clavinova. • The Clavinova corresponds to a portion of the XG format, the Clavinova does not perfectly correspond to all XG parameters. 1. Channel Messages 1.1 Key On and Key Off Receivable note range: C-2 to G8 (true voice A-1 to C7) Velocity range: 1 to 127 (Value accepted only at Note On) 1.2 Control Change If the Control Change Filter in Function [MIDI 2] is set to "ON" transmission and reception are disabled. 1.2.1 Bank Select Cntrl# Parameter 0 Bank Select MSB 32 Bank Select LSB Data Range 0:Normal, 127:Drum 0...127 A new bank selection does not become effective until receipt of the next Program Change message. 1.2.2 Modulation Cntrl# Parameter 1 Modulation Data Range 0...127 1.2.3 Data Entry Cntrl# Parameter 6 Data Entry MSB 38 Data Entry LSB Data Range 0...127 0...127 Sets the value for the parameter specified by RPN/NRPN. 1.2.4 Main Volume Cntrl# Parameter 7 Volume MSB Data Range 0...127 1.2.5 Pan Cntrl# Parameter 10 Panpot MSB Data Range 0...127 0 = left; 127 = right 1.2.6 Expression Cntrl# Parameter 11 Expression MSB Data Range 0...127 1.2.7 Damper Cntrl# Parameter 64 Damper MSB Data Range 0...127 Half pedal continuous data is received and accepted. 1.2.8 Sostenuto Cntrl# Parameter 66 Sostenuto Data Range 0...127 (0-63:off, 64-127:on) 1.2.9 Soft Pedal Cntrl# Parameter 67 Soft Pedal Data Range 0...127 Half pedal continuous data is received and accepted. 1.2.10 Harmonic Content Cntrl# Parameter 71 Harmonic Content Data Range 0...127 (0:-64, 64:+0, 127:+63) Applies adjustment to the resonance value set by the voice. This parameter specifies relative change, with value 64 producing zero adjustment. As values get higher the sound becomes increasingly eccentric. Note that for some voices the effective parameter range is narrower than the legal parameter range. 1.2.11 Release Time Cntrl# Parameter 72 Release Time Data Range 0...127 (0:-64, 64:+0, 127:+63) Applies adjustment to the envelope release time set by the voice. This parameter specifies relative change, with value 64 producing zero adjustment. 1.2.12 Attack Time Cntrl# Parameter 73 Attack Time Data Range 0...127 (0:-64, 64:+0, 127:+63) Applies adjustment to the envelope attack time set by the voice. This parameter specifies relative change, with value 64 producing zero adjustment. Depending on the particular voice type, Attack Time data will have little or no affect. 1.2.13 Brightness Cntrl# Parameter 74 Brightness Data Range 0...127 (0:-64, 64:+0, 127:+63) Applies adjustment to the cutoff frequency set by the voice. This parameter specifies relative change, with value 64 producing zero adjustment. Lower voices produce a softer sound. For some voices the effective parameter range is narrower than the legal parameter range. 1.2.14 Portamento Control Cntrl# Parameter 84 Portamento Control Data Range 0...127 Message should be sent with Note On already sounding. The data value sets the portamento source key number. The channel with change from the currently sounding pitch to the next received Note-On key using Portamento Time of 0. 1.2.15 Effect1 Depth ( Reverb Send Level ) Cntrl# Parameter 91 Effect1 Depth Data Range 0...127 Adjusts the reverb send level. 1.2.16 Effect3 Depth ( Chorus Send Level ) Cntrl# Parameter 93 Effect3 Depth Data Range 0...127 Adjusts the chorus send level. 124