Yamaha DVX-S100 Owner's Manual - Page 17
If you want to mount a speaker, on a commercially available, speaker stand for the front/rear - cables
View all Yamaha DVX-S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
PREPARATION 3 Hang the holes on the protruding screws. 60 mm SPEAKER SETUP I If you want to mount a speaker on a commercially available speaker stand (for the front/rear speakers) The screw holes (at an interval of 60 mm) on the bottom and the rear of the speaker can be used to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. 60 mm • Make sure that the screws are securely caught by the narrow parts of the holes. • You can use the lower holes on the rear of the front/rear speakers. 60 mm Front/rear speaker (bottom) 60 mm Cautions • Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speakers may fall. This damages the speakers or causes personal injury. • Do not install the speakers to a wall with nails, adhesives, or any other unstable hardware. Long-term use and vibrations may cause them to fall. • To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall. • Select a proper position on the wall to mount the speaker so that no one will injure his/her head or face. Front/rear speaker (rear) English 13