Yamaha DVX-S100 Owner's Manual - Page 20
Connecting the antennas, Connecting indoor FM antenna
View all Yamaha DVX-S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CONNECTIONS Connecting the antennas Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. I Connecting indoor FM antenna Connect the included indoor FM antenna to the FM ANT terminal. I Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it. Indoor FM antenna (included) AM loop antenna (included) 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. Bare wire FM ANT 75ΩUNBAL. GND - AM ANT Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. Tab 3 Release the tab. (The tab will return to its original position when you release your finger.) Once connected, pull the wires gently to check that they are connected securely. 4 Orient the AM loop antenna for the best reception. y • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. Notes • The AM loop antenna should be placed away from this unit. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. 16