Yamaha DVX-S100 Owner's Manual - Page 58

TUNING Indication on the front panel (example) Preset station number Reception band SP TUNER C1:AM 630 kHz Preset station Colon*1 group Station frequency *1 The colon (:) lights up in the preset mode and goes off in the tuning mode. Automatic and manual tuning There are 2 ways to tune; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. PRESET/BAND AUTO/MAN'L I Manual tuning If the signal from the station you want to select is weak, you must tune in to it manually. 1 Select TUNER and the reception band following steps 1 and 2 described in "Automatic tuning" at left. 2 Press AUTO/MAN'L so that the "AUTO" indicator goes off from the front panel display. 3 Press PRESET/TUNING u / d to tune in to the desired station manually. Hold down the button to continue the tuning search. y • Manually tuning in to an FM station will automatically change the reception mode to monaural to increase the signal quality. A/B/C/D/E PRESET/BAND PRESET/TUNING DISC DIRECT MEMORY AUTO/MAN'L SILENT PRESET/TUNING INPUT H / G u/d I Automatic tuning 1 Press INPUT H / G (TUNER on the remote control) to select TUNER as the input source. 2 Press PRESET/BAND to select the reception band. ("FM" or "AM") Each time PRESET/BAND is pressed, the mode changes as follows: FM (Tuning mode) ^ AM (Tuning mode) ^ (Preset mode) ^ FM (Tuning mode) ^ ... y • Make sure that the colon (:) turns off when the mode switches to the tuning mode. 3 Press AUTO/MAN'L so that the "AUTO" indicator lights up on the front panel display. 4 Press PRESET/TUNING u / d once to begin automatic tuning. Press u to tune in to a higher frequency, or press d to tune in to a lower frequency. y • Use the manual tuning method if the tuning search does not stop at the desired station because the signal is weak. • When tuned in to a station, the "TUNED" indicator lights up and the frequency of the received station is shown on the front panel display. 54