Yamaha DVX-S100 Owner's Manual - Page 18
CONNECTIONS, Connecting TV and audio/video components, components
View all Yamaha DVX-S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTIONS Connecting TV and audio/video components I Types of video jacks PR PB Y 1 2 3 1 COMPONENT VIDEO jacks (U.S.A., Canada, Australia and General models) Transmit color difference (PB/CB, PR/CR) and luminance separately and provide the best quality picture. 2 VIDEO jack Conventional composite video signal. 3 S VIDEO jack Transmits color and luminance separately and achieves high-quality color reproduction. Notes • Each type of video jack works independently. Signals input through the composite video and S video jacks are only output through the corresponding composite video and S video jacks. • When you connect this unit to a video monitor, a video component and a recording component, connect the same types of jack, for example, the video jack on this unit to the video jack on the video component. • The description of the component video jacks may differ depending on the component (e.g. Y, CB, CR/Y, PB, PR/Y, B-Y, R-Y etc.). When using these jacks, refer also to the operation instructions for the component being connected. • Do not connect this unit to a video monitor through a video cassette recorder. If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this unit. • When progressive output (p.38) is selected in the DVD mode, video signals are only output from the component video jacks. I Types of audio jacks L R 12 3 1 COAXIAL jack Connects a coaxial pin cable and provides the better quality sound than analog audio jacks. 2 OPTICAL jack Connects an optical fiber cable and provides the better quality sound than analog audio jacks. 3 Analog audio jacks Connect an audio pin cable. y • 1 and 2 are digital jacks. • You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. • All digital input jacks are acceptable for 96-kHz sampling digital signals. Notes • Digital output jack and analog OUT (Rec) jacks are independent. Only digital signals are output from digital output jack and analog signals from OUT (Rec) jacks. • The OPTICAL jacks on this unit conform to the EIA standard. If you use an optical cable that does not conform to this standard, this unit may not function properly. • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components. Anti-dust cap Remove the cap covering the OPTICAL jacks when connecting an optical cable. Safely store the cap and always re-insert it in the terminal when the terminal is not in use. (This cap prevents the entrance of dust.) Anti-dust cap 14